How to set up your Android with Warp in case of No Service

Recheck if you’re using the correct SIM card: Warp (Black SIM) and not a Light Speed (White SIM) or Dark Star (Red SIM) one.

1. Swipe up on the home screen to see all your apps.

2. Tap on Settings > Connections / Network & Internet > Mobile Networks / Cellular networks .

3. Turn OFF the switch for Data roaming.

If Data roaming is switched OFF, the switch will be grayed out. If your Mobile Data is turned OFF, the switch will be grayed out as well, and you will not be able to toggle the switch.

1. Swipe up on the home screen to see all your apps.

2. Go to Settings > Connections / Network & Internet > Mobile Networks / Cellular networks > Preferred network type / Network mode.

3. Select LTE only.

   If LTE only is not available, please dial *#*#4636#*#* -> Phone information -> Set Preferred network type -> Change it to LTE only

   

4. Turn ON the VoLTE / HD Voice/ Enhanced calling switch.

   If you do not see the VoLTE option in settings, please reach out to customer support.

   

1. Turn on Wi-Fi: pull down the notification tray by sliding your finger down from the top of the screen, then turn ON the Wi-Fi toggle. Alternatively, you can tap Settings > Connections / Network & Internet and turn Wi-Fi on from there.

2. Turn off Mobile Data: pull down the notification tray by sliding your finger down from the top of the screen, then turn ON the Mobile Data toggle. Alternatively, you can tap Settings > Connections > Data Usage > Mobile Data and turn Mobile Data off here.

1. Swipe up on the home screen to see all your apps.

2. Go to Settings > Connections / Network & Internet > Mobile Networks / Cellular networks  > Access Point Names.

   APN settings are case-sensitive and do not have any spaces or special characters. The settings have to be entered exactly the way it appears below for the phone to work properly.

   

3. Tap the menu button (usually 3 stacked dots).

4. Please click Reset to Default to reset the APN if pre-existing APN profiles from a previous carrier, (skip this step if none are present).

   

5. Tap ADD and create a 1st APN with the following information:

   Leave all other fields blank, and save this configuration.

   APN name: Verizon 2 
   APN: vzwinternet 
   MMS port: 80 
   MMSC: http://mms.vtext.com/servlets/mms 
   MCC: 311 
   MNC: 480 
   Apn protocol: iPv4/iPv6 
   Apn roaming protocol: iPv4/iPv6 
   APN type: default,supl

6. Please tap on the three dots and select 'Save'.

7. Note: Please make sure to tap on the circle next to the “Verizon 2” APN to select this APN to be used as default.   

   Now restart your phone once. If the problem still persists, please proceed with adding the rest of the APNs.

8. Tap ADD and create a 2nd APN with the following information:

   Leave all other fields blank, and save this configuration.

   APN name: Verizon IMS 
   APN: VZWIMS 
   MCC: 311 
   MNC: 480 
   APN type: ims,ia 
   APN Protocol: iPv4/iPv6 
   APN Roaming Protocol: iPv4/iPv6 

9. Please tap on the three dots and select 'Save'.

10. Turn OFF Wi-Fi and Turn ON Mobile Data

    If you have followed the above steps correctly, you should be able to see signal bars by now.

11. Tap ADD and create a 3rd APN with the following information:

    Leave all other fields blank, and save this configuration.

    APN name: Verizon CBS 
    APN: VZWAPP 
    MMSC: http://mms.vtext.com/servlets/mms 
    MCC: 311 
    MNC: 480 
    APN type: cbs,mms 
    APN Protocol: iPv4/iPv6 
    APN Roaming Protocol: iPv4/iPv6 

12. Please tap on the three dots and select 'Save'.

13. Please ensure “Verizon 2” is the APN that is selected and restart the device.

    “Verizon 2” APN should have a blue/green circle next to it.

14. Please restart your phone. Your service should be up and running by now!

    VoLTE Issue: Please use these 3 APN issue variants.
    
    In cases where you are unable to type in APN TYPE, and you only have a drop-down menu of Internet,MMS or Internet or MMS:
    
    Solution: Ensure that while doing this, you are not on an ongoing call on the device. When not on call, the device will have more options and to configure the following APN types in the saved 3 APNs (or new installed 3 APNs)
    
    For Verizon 2 APN: Internet,mms,dun
    
    For Verizon IMS: ims
    
    For Verizon CBS: Internet,mms
    
    Set APN typed as mentioned above, then restart the phone, and 3 APN's can then take effect.

If the phone does not start working after following all the steps mentioned above, then you can try resetting your mobile network settings

1. Please go to Settings > System > Reset options > Reset Mobile Network Settings > Reset settings

   Please note this will remove any saved Wi-Fi passwords on certain phones.

2. Restart your device afterward.

3. After the reset, please follow all the steps mentioned in this guide (part 1 to part 5) again to ensure the settings are configured properly.

If you are still having trouble accessing services after following these steps, then please reach out to our customer support via email ([email protected]), chat, or over a call at any time of the day.