Skip to main content

List of APN settings

warning

This article covers advanced configurations such as APNs (Access Point Names). If you're not sure what those are, we recommend contacting our support team for help troubleshooting your line.

This is a list of APN settings for troubleshooting cellular data issues. You can also find APN update instructions for your device and network on our website at usmobile.com/apn-download.

note

If you're using an Apple (iOS) device, you don't need to manually enter your APN settings. We offer profiles you can download on the website above.

APN values are case-sensitive

APN entries must be entered exactly as shown — including capitalization, spacing, and punctuation. An incorrect value fails silently: your line may show signal but have no mobile data, with no error message to indicate the problem.

warning

If you see settings not mentioned here, leave them unchanged — if fields are blank, leave them blank, and if they're pre-filled, don't change them.

Light Speed​

For upgraded Light Speed network:

For legacy GSM network:

  • Name: US Mobile
  • APN: pwg
  • MMSC: http://pwg.mmsmvno.com/mms/wapenc
  • MCC: 310
  • MNC: 260 (If unable to save with 260, try 240)
  • APN Type: (leave empty, but if you run into data or MMS problems, try default,MMS or default,supl,mms, or Internet+MMS)
  • APN Protocol: IPv4/IPv6
  • APN Roaming Protocol: IPv4

Warp​

Here are the APN settings for the Warp network. You'll need to add multiple APNs.

First APN (Warp 2)​

  • APN name: Warp 2
  • APN: vzwinternet
  • MMS port: 80
  • MMSC: http://mms.vtext.com/servlets/mms
  • MCC: 311
  • MNC: 480
  • APN protocol: iPv4/iPv6
  • APN roaming protocol: iPv4/iPv6
  • APN type: default,supl

Important: Select the circle next to the Warp 2 APN to set it as default.

Restart your phone. If the problem persists, proceed with adding the remaining APNs.

(Optional) Second APN​

If using a Samsung device, add this APN before proceeding (FOTA)​

  • APN name: Warp FOTA
  • APN: VZWADMIN
  • MCC: 311
  • MNC: 480
  • APN type: fota
  • APN Protocol: iPv4/iPv6
  • APN Roaming Protocol: iPv4/iPv6

Second APN (IMS)​

  • APN name: Warp IMS
  • APN: VZWIMS
  • MCC: 311
  • MNC: 480
  • APN type: ims,ia
  • APN Protocol: iPv4/iPv6
  • APN Roaming Protocol: iPv4/iPv6

Add last APN (Warp CBS)​

Make sure Warp 2 is the APN that is selected and restart the device. The Warp 2 APN should have a blue or green circle next to it.

Turn airplane mode on, then off, and test your services.

If you're still having data issues after updating your APN settings, contact us.

VoLTE troubleshooting​

In cases where you can't enter an APN type and only have a drop-down menu of Internet, MMS, or Internet or MMS:

Make sure you're not on an ongoing call — when not on a call, the device will have more options to configure the following APN types:

  • For Warp 2 APN: Internet,mms,dun
  • For Warp IMS: ims
  • For Warp CBS: Internet,mms

Set APN types as mentioned above, restart the phone, and the 3 APNs can then take effect.

Dark Star​

  • Name: Darkstar
  • APN: ereseller
  • MMSC: http://mmsc.mobile.att.net
  • MMS Proxy: proxy.mobile.att.net
  • MMS Port: 80
  • MCC: 310
  • MNC: 410 (Use 280 if the APN doesn't save when entered)
  • APN Type: default,supl,mms,fota
  • APN Protocol: IPv4/IPv6

Was this article helpful?